Table of Contents
Advertisement
9
Lock Busy LED Indications
Lock BUSY indicates lock is processing a card (such as a key configuration card for online SE processor or offline void
list card with many entries). Card should be kept in close proximity to reader until end of process. Lock BUSY indi-
cation does not cancel or overwrite any other indications. Indications related to access permissions or setup card
processing are still present.
Indication scheme is described by figures below:
Card detected
Lock BUSY indication Mixed with Scenario for Offline Audit Trail Card
Card detected
Card detected
Card presentation start*
Config card processed
For Technical Assistance call Corbin Russwin at 1-800-810-9473
Copyright © 2020-2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights
reserved. Reproduction in whole or in part without the express written permission of ASSA
ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Lock BUSY indication
1.5s
1.5s
Card de-
Lock BUSY
tected
indication
Online BLE Access
1.5s
Lock BUSY
indication
Online SE Keys Setup Card (Configuration)
1.5s
*Introduced with firmware version 3.8 - in prior firmware versions only
"Config card processed" LED indication is displayed.
1.5 second delay
Continuous yellow flash (.1s every 1 sec)
Audit trail card
with lock busy indication
Card suc-
cess
BLE access
BLE
success
Yellow flashes
(.1seconds every .9 seconds until read is completed)
20
IN100 Series
FE6600/BL6600/MP6600
Multi-Point Lock
Ten yellow flashes
(.125 seconds every .125 seconds)
FM558 09/23
Advertisement
Table of Contents
