Led Indications - Assa Abloy Corbin Russwin IN100 Installation Instructions Manual

IN100 Cylindrical Lock
The communication hub has a single LED. It supports an optical scheme of red, green and yellow.
The indication scheme is described by the figures below:
Figure 1.
Communication hub normal
operation LED indication
Figure 2.
Communication hub maintenance
LED indication
Figure 3.
AH40 Communication hub
Ethernet LED indication
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.

7) LED Indications

Communication Hub LED indications
Online
Aperio lock
®
offline
EAC offline
Aperio lock and
®
EAC offline
UHF
communication
Some special LED indication schemes* are
used during lock maintenance actions:
Pairing active
Ethernet LED indication
The LED on the AH40 communication hub* indicates both the status of
the Ethernet link level and ethernet communication:
Ethernet
link connected
Ethernet
communication
*For more information, refer to Aperio Online Quick Installation Guide
(Document No: ST-001322-PF Date: 2015-12-23)
17
2 sec.
Green
Green + one
red flash
Green + two red flashes
Green + three
red flashes
Yellow + off,
fast flash
2 sec.
2 sec.
Green
Green +
off fast flash
Yellow + green