Table of Contents
Advertisement
2
Product & Technical Specifications
Operating temperature: -13°F (-25°C) to 151°F (66°C) Humidity: < 85% non-condensing
Input Power: DC 9V, 1.5A (6 AA alkaline batteries)
Optional hard-power 12-24VDC, 1.0A
Reader with multiCLASS SE
High Frequency (13.56 MHz)
HID iCLASS
HID iCLASS SE
HID iCLASS
HID MIFARE
HID DESFire
MIFARE Classic
DESFire EV1
DESFire EV2/EV3 (EV1 Compatibility)
Low Frequency (125 kHz)
AWID
EM4102
PIV/PIV-I
40-bit BCD, 64-bit BCD, 75 bit, 128-bit or 200-bit outputs
NFC & BLE-enabled Mobile Phones:
HID Mobile Access
Apple Wallet Seos (NFC)
Apple Wallet DESFire
Google Wallet DESFire
NOTE: reference IN100 catalog for complete list of certifications
UL NOTES:
UL Listed to UL294 Indoor Dry Use, 32°F (0°C) to 120°F (49°C ), 93% Relative Humidity at 90°F (32°C) in-
stalled in accordance with NFPA70, National Electrical Code.
ULC-60839-11-1 Listed Security Grade 2 Indoor Dry Use, 32°F (0°C) to 120°F (49°C ), 93% Relative Humidity
at 90°F (32°C), IP4X installed in accordance with CSA C22.1, Canadian Electrical Code.
UL 294 Access Control Ratings:
Destructive Attack Level 1, Line Security Level 1, Endurance Level 4, Standby Power Level 1
Reader controller firmware version 3.14.x or greater
The electronic access control system shall not prohibit the free exit granted by other emergency systems
(e.g. fire, environmental)
For Use with the separately Listed Model AH20, AH30 and AH40 HUBs
For Technical Assistance call Corbin Russwin at 1-800-810-9473
Copyright © 2020-2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights
reserved. Reproduction in whole or in part without the express written permission of ASSA
ABLOY Access and Egress Hardware Group, Inc. is prohibited.
technology offers support for the following credentials:
®
®
(SIO-enabled)
®
Seos™
®
SE
®
EV1 SE
®
®
,
(BLE and NFC)
®
(NFC)
®
(NFC)
®
4
FM558 09/23
IN100 Series
FE6600/BL6600/MP6600
Multi-Point Lock
Advertisement
Table of Contents
