Communication Hub Led Indications - Assa Abloy Corbin Russwin IN100 Series Installation Instructions Manual

IN100 Series
FE6600/BL6600/MP6600
Multi-Point Lock
6

Communication Hub LED Indications

Communication hub has a single LED. It supports an optical scheme of red, green and yellow.
Indication scheme is described by figures below:
Communication Hub NORMAL OPERATION LED indication
Online
Aperio lock
®
offline
EAC offline
Aperio lock and
®
EAC offline
UHF
communication
Some special LED indication schemes are used during lock maintenance actions:
Communication Hub MAINTENANCE LED indication
Pairing active
LED on AH40 communication hub indicates both status of Ethernet link level and ethernet
AH40 Communication Hub ETHERNET LED indication
Ethernet
link connected
Ethernet
communication
*For more information, refer to Aperio Online Quick Installation Guide
Document No: ST-001322-PF Date: 2015-12-23
FM558 09/23
2 sec.
2 sec.
communication:
2 sec.
17
Copyright © 2020-2023, ASSA ABLOY Access and Egress Hardware Group, Inc.
All rights reserved. Reproduction in whole or in part without the express written permission
of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Green
Green + one
red flash
Green + two
red flashes
Green + three
red flashes
Yellow + off,
fast flash
Yellow + green
Green
Green +
off fast flash