Assa Abloy Corbin Russwin IN100 Series Installation Instructions Manual page 10

4 Lock Installation (Continued)
4 Assemble Outside Trim
1. With outside lever horizontal, insert the mounting posts through outside of door and lock body.
Make certain the lever spindle is properly engaged inside the lock body (Fig 4A).
2. On the inside of the door, insert spindle into square hole of mortise lock (Fig 4B).
3. Slide inside adapter and plate assembly over spindle and secure with (2) 8-32 X 5/8" Phillips
oval head and lock washer machine screws.
NOTE: For FE6600 Muséo levers, ensure that position of set screw hole on inside adapter is oriented
Outside of Door
Outside Trim
Fig. 4A Detail
Spindle
Outside Trim
For Technical Assistance call Corbin Russwin at 1-800-810-9473
Copyright © 2020-2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights
reserved. Reproduction in whole or in part without the express written permission of ASSA
ABLOY Access and Egress Hardware Group, Inc. is prohibited.
to match location of hole in inside lever handle.
Additionally, ensure that slot in spindle is facing away from door (Fig. 4B), and is oriented to
match location of hole in inside lever handle.
Fig. 4A
Slotted Spindle
10 FM558 09/23
IN100 Series
FE6600/BL6600/MP6600
Multi-Point Lock
Inside of Door
Wire Harness
(From Lock Body)
Set Screw Hole
Fig. 4B