Assa Abloy Corbin Russwin IN100 Series Installation Instructions Manual page 11

IN100 Series
FE6600/BL6600/MP6600
Multi-Point Lock
4 Lock Installation (Continued)
5 Install Inside Rose and Inside Lever Assembly
1. Place inside rose flush against door surface and rotate first counter-clockwise to seat
the threads, then clockwise to securely tighten.
2. Slide lever onto spindle until fully seated. Be sure handle is horizontal and facing the hinge
side of the door. Push lever onto spindle so minimum gap is visible.
3. Tighten the set screw securely with a T20 Torx
4. Finish securely tightening (2) #12-24 lock body screws.
5. Before closing the door, test that the lever is functional and ensure
smooth operation of the latchbolt.
#12-24 screws
Fig. 5
FM558 09/23
driver.
®
Inside of Door
Spindle
Set Screw
11
Copyright © 2020-2023, ASSA ABLOY Access and Egress Hardware Group, Inc.
All rights reserved. Reproduction in whole or in part without the express written permission
of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Rose
Inside Lever