Seagull Models RV-8 Assembly Manual page 7

6.
7.
Epoxy
8.
9.
INSTALL THE AILERONS
CONTROL HORN
Locate the aileron control horns. he taller
control horn is used for the ailerons, and the
shorter horn for the laps.
1.
Fiberglass control horn
Use sandpaper to scuf the bottom of the
aileron and lap control horns. Use a paper
towel and isopropyl alcohol to remove any
oils or debris from the control horns.
2.
Check the it of the control horns to the
aileron and lap. hey should rest lush
against the control surface as shown.
3.
7