Seagull Models RV-8 Assembly Manual page 34

RV-8 ARF 35-40cc
11.
12.
5mm
hen, use 5mm drill bit to enlarge the
holes on the electric motor box.
13.
Attach the motor mount to the front
of the electric motor box using four
6.5mm blind nut, four M5x25mm hex
head bolts to secure the motor. Please see
picture shown.
34
6.5mm
14.
M5x25mm
15.
16.
Attach the speed control to the side of
the motor box using two-sided tape and
tie wraps. Connect the appropriate leads
from the speed control to the motor. Make
sure the leads will not interfere with the
operation of the motor.
Instruction Manual.
160mm