Uconnect Voice Recognition; Introducing Voice Recognition; Basic Voice Commands; Get Started - Jeep Wrangler Owner's Manual

UCONNECT VOICE RECOGNITION

I V R
NTRODUCING OICE ECOGNITION
Start using Uconnect Voice Recognition with these helpful
quick tips. It provides the key Voice Commands and tips
you need to know to control your vehicle's Voice
Recognition (VR) system.
Uconnect 4/4 NAV With 8.4-inch Display
B V C
ASIC OICE OMMANDS
The following basic Voice Commands can be given at any
point while using your Uconnect system.
Push the VR button on the steering wheel. After the beep,
say:
 "Cancel" to stop a current voice session.
 "Help" to hear a list of suggested Voice Commands.
 "Repeat" to listen to the system prompts again.
Notice the visual cues that inform you of your Voice
Recognition system's status.
G S
ET TARTED
The VR button is used to activate/deactivate your
Voice Recognition system.
Helpful hints for using Voice Recognition:
 Reduce background noise. Wind noise and passenger
conversations are examples of noise that may impact
recognition.
 Speak clearly at a normal pace and volume while facing
straight ahead.
GETTING TO KNOW YOUR VEHICLE
 Each time you give a Voice Command, first push the VR
button, wait until after the beep, then say your Voice
Command.
 You can interrupt the help message or system prompts
by pushing the VR button and saying a Voice Command
from the current category.
Uconnect Voice Command Buttons
1 — Push To Start Or Answer A Phone Call And Send Or
Receive A Text
2 — Push The Voice Recognition Button To Begin Radio,
Media, And Climate Functions
3 — Push To End Call
35