POWER SAVE MODE (STANDBY MODE)
The camera will switch to the power-saving standby mode after a
preset time to extend battery life if this function is activated.
The device has two power save levels.
– Standby mode is activated after 30 s/1 min/2 min/5 min/10 min
– Automatic LCD panel shutdown (see p. 89)
Factory setting:
2 min
▸
Select
in the main menu
Camera Settings
▸
Select
Power Saving
▸
Select
Auto Power Off
▸
Activate the function
▸
Select
Settings
▸
Select the desired setting
(
,
,
,
,
30 s
1 min
2 min
5 min
10 min
Note
• The camera can be woken from standby mode at any time by
pressing the shutter button or by switching the main switch off
and on again.
86
CAMERA BASIC SETTINGS ▸ POWER SAVE MODE (STANDBY MODE)
)
LCD PANEL/VIEWFINDER SETTINGS
The camera comes equipped with a 3" liquid crystal color panel,
which is protected by a glass cover made of extremely hard and
scratch-resistant glass.
The following functions can be configured and used individually:
– Use of the LCD panel and EVF (electronic viewfinder)
– Eye sensor sensitivity
– Brightness
– Color rendering
– EVF Frame Rate
– Automatic LCD panel and EVF shutdown