Leica SL3 Instruction Manual page 208

When toggling between the two output channels, the setting for the
selected memory slot will remain unchanged. Since it is possible
that different profiles are saved on the same slot depending on the
output channel, it is possible that a different profile or an unused
memory slot is selected. The name of the active profile will change
accordingly next to the menu item
for the pre-configured profiles, which exist on the same memory
slot for both output channels.
208
VIDEO SETTINGS ▸ VIDEO GAMMA
. This does not apply
LUT Profile
SELECTING THE LUT PROFILE
In addition to the two pre-configured LUT profiles, three more mem-
ory slots are available for custom LUT profiles.
▸ Select in the main menu
Log Settings
▸ Select
L-Log Settings
▸ Select
LUT Profile
• The list of profiles available for the active output channel
appears.
▸ Select the desired setting
( , , , ,
Off Natural Classic LUT 1
Note
• Unused memory slots appear in the list as
. A memory slot filled with a custom LUT profile will display its
3
name instead.
The list of selectable LUT profiles depends on the currently selected
output channel (camera/HDMI). The channel is displayed next
to the menu item . When the channel is set to
Output
selection list will display the profiles available for HDMI output.
The setting will therefore show the profiles available for
EVF-LCD
camera display.
, )
LUT 2 LUT 3
, , and
LUT 1 LUT 2
, the
HDMI
LUT