Leica SL3 Instruction Manual page 291

PREPARATION
▸ Fully charge and insert the rechargeable battery
▸ Remove the second card (where applicable) from the camera
▸ Any stored firmware files on the memory card must be removed
• We recommend saving any images on the memory card and
reformatting it before the update.
(Caution: Loss of data! All data stored on the memory card will
be lost during formatting.)
▸ Download the latest firmware version
▸ Save the download to the memory card
• The firmware file must be stored in the main directory of the
memory card (not in a sub-directory).
▸ Insert the memory card into the camera
▸ Switch the camera on
UPDATING THE CAMERA FIRMWARE
▸ Preparation
▸ Select in the main menu
Camera Information
▸ Select
Camera Firmware Version
▸ Select
Firmware Update
• A prompt with information about the camera is displayed.
▸ Check the version information
▸ Select
Yes
• The prompt
Save profiles on SD Card?
▸ Select /
Yes No
• The update will start automatically.
• The status LED will flash during this process.
• Once the process has completed successfully, a relevant on-
screen message and prompt to restart the device will appear
on screen.
▸ Switch the camera off and on again
Note
• Date & time, as well as the preferred language will have to be
set up again after the restart. Relevant prompts will appear on
screen.
• These settings will be applied automatically if the update is load-
ed via Leica FOTOS.
OTHER FUNCTIONS ▸ FIRMWARE UPDATES
appears.
291