Logging The Shooting Location - Leica SL3 Instruction Manual

LOGGING THE SHOOTING LOCATION

(ONLY IN CONNECTION WITH THE LEICA FOTOS APP)
Location information can be sourced from a mobile device in con-
nection with the Leica FOTOS app. Current location information will
then be written to the Exif data of the images (geotagging).
▸ Activating GPS functions on a mobile device
▸ Activate Leica FOTOS and connect to the camera (see chapter
"Leica FOTOS")
▸ Activate geotagging for this camera in Leica FOTOS
Notes
• The use of GPS and associated technologies may be restricted in
some countries or regions. Violations will be prosecuted by local
authorities. You should therefore contact your travel agent or
the embassy of your destination country for relevant information
beforehand.
• It will take a few seconds for the Bluetooth connection to estab-
lish. The configured shutdown time should be considered when
choosing a delay time if shutdown is enabled in the camera.
GEOTAGGING STATUS
The status of the current location information is displayed in the
Control Center.
The location information is current (most recent geo-
location max. 15 mins prior).
The location information is not necessarily current
anymore (most recent geolocation max. 12 h prior).
The available location information is outdated (most
recent geolocation more than 12 h in the past).
No location data will be written to Exif data.
No icon Geotagging is deactivated.
Location information will be continuously updated as long as the
camera is connected to Leica FOTOS. The Bluetooth function of the
camera and the mobile device must therefore remain enabled to
ensure latest information. It is, however, not necessary for the app
to be running in the foreground.
VIDEO SETTINGS ▸ DATA MANAGEMENT
215