AUTOMATIC SEQUENCE
An automatic sequence of focus positions can be initiated if at least
two positions have been configured.
START
▸
Configure at least two focus positions
▸
Tap the "START" button
• The "START" button becomes "STOP" for the duration of the
sequence.
• All configured focus positions will be accessed in sequence
(once the set delay time has elapsed - if any).
• All other buttons are deactivated while the focus sequence
runs.
Note
• The automatic focus sequence can be run any number of times.
The focus sequence will automatically revert to the first position
when it is restarted.
256
RECORDING VIDEO ▸ FOCUSING
CANCEL
▸
Tap the "STOP" button
• The running focus sequence is canceled.
Initiating the automatic focus sequence directly at the
beginning of the recording
The automatic focus sequence can be initiated directly at the begin-
ning of the recording.
▸
Select
in the main menu
Focus Mode
▸
Select
Follow Focus
▸
Select
Start FF with Recording
▸
Select
On
Exiting the function
▸
Canceling a running sequence
▸
Tap the "EXIT" button
• The "EXIT" button is unavailable while a focus sequence is
running.