Personalized Lens Settings; Ev Increment - Leica SL3 Instruction Manual

Hide thumbs Also See for SL3:
Table of Contents

Advertisement

PERSONALIZED LENS SETTINGS

The total angle of rotation of the lens used for focusing can be
individually adjusted. The setting selected indicates the angle of
rotation required to change the focus setting from infinity to the
nearest possible distance. Example: for a setting to
focus range will be run through when the focus ring is turned by one
quarter. A full turn of the focus ring will be needed for a setting to
. Smaller values facilitate a faster, larger values a more precise
360°
adjustment. A setting to
Maximum
Unlike the permanent settings, a setting to
in a non-linear dependency of rotation angle and focus setting. The
extent of the change depends dynamically on the speed of rotation.
With slow rotation, the same angle of rotation (e.g. 45°) causes a
smaller change than with fast rotation.
Factory setting:
Standard MF
Select
in the main menu
Focus Settings
Select
Manual Focus Throw
Select the desired setting
(
,
,
,
Standard MF
90°
120°
150°
,
,
)
330°
360°
Maximum
Notes
• The settings
and
Standard MF
dent.
may, for example, mean a rotation angle of 360°
Maximum
or 720°.
220
PRACTICAL DEFAULT SETTINGS ▸ PERSONALIZED LENS SETTINGS
, the entire
90°
offers the highest precision.
will result
Standard MF
,
,
,
,
,
,
180°
210°
240°
270°
300°
are highly lens-depen-
Maximum

EV INCREMENT

You can choose between 1⁄2 EV or 1⁄3 EV graduations. This will al-
low you to choose between stronger or more subtle effects for your
relevant settings.
This setting doesn't just apply for exposure compensation settings.
It also specifies the sensitivity of the dials in standard shooting
mode, i.e. the increment width with which the shutter speeds and
the aperture will be set. A setting to
speeds and aperture values that much faster each time the dial is
moved one click further and the correct setting is achieved quicker.
A setting to
facilitates a more precise setting.
1/3
Factory setting:
1/3
Select
in the main menu
EV Increment
Select the desired setting
(
,
)
1/2
1/3
will change the shutter
1/2

Advertisement

Table of Contents
loading

Table of Contents