DISTANCE DISPLAY
Distance information is shown in the top display during manual
focusing.
– Focus Mode MF: when the shutter button is pressed to the first
pressure point
– Focus Mode AF: when the shutter button is pressed and held at
the first pressure point, followed by a turning of the focus ring
The unit of measure (
or
) can be selected, see p. 85.
m
ft
Note
• The focus distance is estimated based on the focus position
transmitted by the lens.
FOLLOW FOCUS
This function facilitates automatic transitions to specified focus
settings (focus positions). Up to threes such focus positions can
be pre-configured and optionally be set up with a delay time. When
a focus position is accessed, the camera will automatically focus
on the set distance. The transition will then be achieved smoothly
and with a configurable speed. That way, soft, almost unnoticeable
transitions are created. Prerequisite is that the relevant distances
are known beforehand.
The specified focus positions can be accessed individually or in an
automated sequence.
▸
Select
in the main menu
Focus Mode
▸
Select
Follow Focus
▸
Select
Focus Position
• "Follow Focus" is activated. The Follow Focus menu appears.
• The Follow Focus menu remains visible until the function is
exited.
RECORDING VIDEO ▸ FOCUSING
251