File Format - Leica SL3 Instruction Manual

Hide thumbs Also See for SL3:
Table of Contents

Advertisement

FILE FORMAT

Choose the JPG format
or the standardized raw data format
JPG
(= digital negative). Both can be used individually or simulta-
DNG
neously.
When creating JPGs, an initial processing occurs in the camera. Var-
ious parameters, including contrast, saturation, black level, or edge
sharpness are set automatically. The result is then compressed
and stored. The immediate result is an image that is optimized for
various uses and a quick preview. For post-processing, on the other
hand, DNG images are recommended.
DNG files contain all raw data as recorded by the camera sensor at
the time the photo is taken. Special software (e.g. Adobe
shop
Lightroom
or Capture One Pro
®
®
DNG format files or to work with this format. Post-processing will
allow exact adjustments of many parameters to your own expecta-
tions.
Factory setting:
DNG + JPG
Photo-
®
) will be needed to display
®
Select
in the main menu
File Format
Select a format
(
,
,
)
DNG
DNG + JPG
JPG
Notes
• The standardized DNG format is used for the storage of raw
image data.
• The remaining number of shots shown in the LCD panel will not
necessarily change after every shooting. That very much depends
on the object; very fine image structures result in higher data
quantities, while homogeneous surfaces mean less data.
STILL IMAGE SETTINGS ▸ FILE FORMAT
93

Advertisement

Table of Contents
loading

Table of Contents