MF ASSIST FUNCTIONS
ENLARGEMENT IN AF MODE
You can access the enlargement function independent of focusing
for a better assessment of the settings.
The function
must be assigned to one of the function
Magnification
buttons to use this feature (see p. 76).
Factory setting: Function button at the front (top)
Assigning a function to a specific function button
▸
See p. 76
Accessing the enlargement function
▸
Press the function button
• An enlarged image section appears. The position of the en-
largement depends on the position of the AF frame.
• The rectangle within the frame at the top right represents the
current magnification, as well as its position in the displayed
cropped section.
Adjusting the enlargement function
▸
Turn the thumbwheel
• The image section toggles between magnification factors.
Changing the position of the enlarged section
▸
Press the joystick in the desired direction
Exiting the enlargement function
▸
Tap the shutter button
or
▸
Press the function button again
Notes
• The enlargement function remains active until it is exited.
• The most recently magnification function will still be active the
next time the feature is accessed.
AF ASSIST LAMP
The AF assist lamp is not active in video mode.
ACOUSTIC AF CONFIRMATION
You can set an acoustic confirmation signal for successful focus
metering in AF mode (see p. 90).
Note
• This function is unavailable while recording.
RECORDING VIDEO ▸ FOCUSING
247