Leica SL3 Instruction Manual page 166

You can select the desired number of frames (3 or 5). The exposure
difference, which can be set via
▸ Select in the main menu
Drive Mode
▸ Select
Exposure Bracketing
▸ Select
Settings
▸ Select the desired number of frames under
the submenu
▸ Select the desired exposure offset under
menu
▸ Select the desired
Exposure Compensation
• The marked exposure values change positions according to the
settings selected. In the case of exposure compensation, the
scale also shifts.
• The selected exposure compensation value will be applied to
the entire series of shots.
▸ Select the desired setting under
• With the factory setting in place (
ries will run after the shutter button is pressed once; when the
setting is , each picture must be taken individually.
Off
▸ Take one or several shots by pressing the shutter button
166
PHOTOGRAPHY ▸ SHOOTING MODES
, can be up to 3 EV.
EV Steps
Number of Frames
in the sub-
EV Steps
value in the submenu
in the submenu
Automatic
), the entire exposure se-
On
Notes
• appears on the LCD panel if the bracketing function is acti-
vated. You can watch the effect of the function on screen during
shooting (brighter or darker).
• Depending on the exposure mode, the exposure gradations are
produced by changing the shutter speed and/or aperture value:
– Shutter speed (A/M)
in
– Aperture (S)
– Shutter speed and aperture value (P)
• The sequence of shots: underexposure/correct exposure/over-
exposure.
• The working range for automatic bracketing may be limited de-
pending on the available shutter speed/aperture combination.
• With automatic ISO sensitivity control enabled, the sensitivity
calculated by the camera automatically for the raw files will also
be applied to all other shots in the series, i.e. the ISO value will
not change during bracketing. This may mean that the slowest
shutter speed specified under
• The working range for automatic bracketing may be limited (de-
pending on the originally set shutter speed). The specified num-
bers of frames will be taken regardless. Several shots in a series
may consequently have the same exposure values.
• The function remains active until another function is selected
from the
Drive Mode
ed, another bracketing is taken each time the shutter button is
pressed.
Shutter Speed Limit
submenu. If no other function is select-
is exceeded.