Connecting With Paired Devices - Leica SL3 Instruction Manual

USING THE MENU TO
Where the connection wizard was not used or other mobile devices
should be connected, the same settings are always accessible via
the menu item .
Leica FOTOS
IN THE CAMERA
▸ Select in the main menu
Leica FOTOS
▸ Select
Pairing
▸ Wait until the QR code appears on the LCD panel
ON THE MOBILE DEVICE
▸ Launch the Leica FOTOS app
▸ Select "Add Camera"
▸ Select the camera model
• Connection is being established. The process may take a few
seconds.
• Once successfully connected, the Status LED will light briefly,
and the camera displays a relevant message.
Notes
• The pairing process may take a few minutes to complete.
• Each mobile device only needs to be paired with the camera
once. The process adds the device to the list of known devices.
• The Bluetooth function is disabled if the connectivity mode
is selected (see p. 300).
plane mode
and the relevant menu item will be grayed out.
Air-
will not be available,
Pairing

CONNECTING WITH PAIRED DEVICES

VIA LEICA FOTOS CABLE (for iPhone only)
The Leica FOTOS Cable makes connectivity particularly easy and
quick.
▸ Connect the camera and mobile device via the Leica FOTOS
cable
• The connection is established automatically.
Note
USB mode must be set to
Apple MFi
sure an automatic connection via the Leica FOTOS Cable.
VIA WI-FI
IN THE CAMERA
▸ Select in the main menu
Leica FOTOS
▸ Select
Connectivity
▸ Select or
Performance Mode
ON THE MOBILE DEVICE
▸ Launch the Leica FOTOS app
▸ Select the camera model
▸ Confirm the prompt
• The camera connects to the mobile device automatically.
LEICA FOTOS ▸ CONNECTIVITY (iPhone users)
or to en-
Select on Connection
Eco Mode
297