CHARGING VIA USB
The rechargeable battery in the camera can be automatically
charged when the camera is connected to a computer or another
suitable power source via USB cable.
Notes
• The SL3 can also be charged when it is switched on.This requires
a USB PD-capable power supply unit with at least 9 V/3 A (27 W).
If a power supply unit with an output of less than 27 W is used,
the camera is only charged when it is switched off.
• The battery in the optionally available multifunction handgrip
(HG-SCL7) can also be charged via the camera in this way.
• The charging will start automatically.
• For safety reasons, the battery is only minimally charged on de-
livery. The battery must be activated with an initial charge before
first use.
38
PREPARATION ▸ INSERTING/REMOVING THE BATTERY
INSERTING/REMOVING THE BATTERY
▸
Ensure that the camera is switched OFF (see p. 63)
INSERTION
"click"
▸
Insert the battery into the slot with the groove pointing towards
the LCD panel and gently push until you hear and feel it clicking
into place