Importing a custom LUT profile
▸
Download or export an LUT profile as a CUBE file
▸
Give the file a meaningful name (file name max. 8 characters, file
ending ".cub")
• This file name (without the ending) will appear as a profile
name in the camera after import. A later file name change on
the camera will not be possible.
▸
Save the download to the memory card
• Store the file in the main directory of the memory card (not in
a sub-directory).
▸
Insert the memory card into the camera
▸
Select an unused memory slot
• You will have to delete an existing profile first if there is no
unused memory slot available.
• The "Import" dialog appears. It displays the files found on the
memory card.
• The message
Import Failed
find a compatible file.
▸
Select the profile to import
▸
Select
Yes
206
VIDEO SETTINGS ▸ VIDEO GAMMA
will appear if the camera does not
Notes
• You can only import LUT profiles with the file ending ".cub".
• Files with the ending ".cube" will not be recognized. These can,
however, simply be renamed before saving them to the SD card.
• File names must be max. 8 characters (incl. spaces) long.
• Incompatible files will not be recognized.
• A maximum of six profiles saved to the memory card will be dis-
played. The profiles found on the card will be displayed chrono-
logically in ascending order: the most recently saved profile will
appear at the top.
• In rare cases, a particular combination of memory card and com-
puter may result in a search returning only three profile files.
• Where two memory cards are in use, and both contain compati-
ble files, only the files on SD1 will be considered.