Start Time; Tc Synchronization - Leica SL3 Instruction Manual

START TIME

The start time can be reset manually or can be set to a specific
value if multiple cameras are used for recording. Alternatively, the
current time set in the camera can be specified as the timecode.
▸ Select in the main menu
Timecode
▸ Select
Start Time
▸ Select the desired setting
( , ,
Reset Timecode Manual Camera Time
The desired start time can be set in the format hour:minute:sec-
ond:frame if is selected.
Manual
)

TC SYNCHRONIZATION

There is a choice of two methods for synching the timecode record:
The option applies data from a connected timecode gen-
External
erator. It dictates the timecode signal. The camera applies the data
received from the external signal.
The option forces the camera to apply the timecode signal
Master
generated by its internal timecode generator. The externally con-
nected timecode generator applies the signal received from the
camera and forwards it to the network.
▸ Select in the main menu
Timecode
▸ Select
TC Synchronization
▸ Select the desired setting
( , )
External Master
VIDEO SETTINGS ▸ TIMECODE
203