REMOVING THE BATTERY
1
2
3
▸
Push down the ejector pin
• Battery is pushing out slightly.
▸
Press down on the battery lightly
• The battery unlocks and pushes out fully.
▸
Remove the battery
Note
• The battery inside the handgrip can be recharged via USB-C.
• Battery in the handgrip is preferred. Once depleted, the camera
will automatically switch from the battery inside the handgrip to
the battery inside the camera.
• Removing the battery while the camera is switched on may result
in the loss of custom settings or damage to the memory card.
52
PREPARATION ▸ MULTIFUNCTION HANDGRIP HG-SCL7
INSERTING THE BATTERY
1
2
▸
Insert the battery into the slot with the groove pointing towards
until you hear and feel it clicking into place
CLOSE THE BATTERY COMPARTMENT
▸
Close the cover over the battery compartment
• It will click to signify it is locked.
▸
Click down the locking toggle
Note
• The camera must have a battery with at least minimal charge
inserted to utilize a rechargeable battery in the handgrip.