Install Levers; Install Indicator Mounting Plate; Install Indicator Assembly - Assa Abloy 8800 Series Installation Instructions Manual

Mortise lock used with sectional trim and v series indicators
Table of Contents

Advertisement

8800 Series Mortise Lock
Used with Sectional Trim and V Series Indicators
Installation Instructions
5. Installation, continued

4. Install Levers

1. Insert outside mounting plate through door and lock body,
and hold (Figure 8).
2. Align and fasten inside mounting plate securely with two (2)
#8-32 x 1-1/4" screws.
3. Install roses on inside and outside adapter plates.
4. If included, press rose adapter into rose and mounting plate
assemblies.
5. Unscrew inside spindle 1/2 turn and align ramp in the
horizontal position.
6. Slide plastic bushing onto outside lever and spindle and insert
through the lockbody.
7. Slide plastic bushing onto inside lever and attach to spindle.
Then tighten inside lever set screw.

5. Install Indicator Mounting Plate

1. Align and fasten inside mounting plate securely with two (2)
#8-32 x 1-1/4" screws.
2. If indicators are being used on both sides of door, repeat step
5.1 for opposite side.

6. Install Indicator Assembly

1. Verify lock is in unlocked state (turn outside lever to confirm).
2. Verify indicator is in vacant/unlocked position.
3. Assemble indicator assembly onto mounting plate (Figure 10).
4. Secure indicator assembly to door with two (2) machine
screws.
Use #8-32 x 5/8" screw for top
Use #8-32 x 3/8" screw for bottom
5. If indicators are being used on both sides of door, repeat steps
6.1 through 6.3 for opposite side.
NOTE: Torx security screws recommended.
1-800-438-1951 • www.assaabloy.com
Copyright © 2020, 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Figure 8
Inside of
Door
Rose
#8-32 x 1-1/4"
Screws
Inside
Mounting
Plate
Outside Mounting Plate
Inside of Door
Inside Lever
Plastic Bushing
Rose Adapter
Outside Lever and Spindle
Figure 9
Figure 10
5
Set Screw
Outside of
Rose Adapter
Mounting Plate
#6 x 3/8" Screws
Indicator
Assembly
#8-32 x 5/8"
Screw
#8-32 x 3/8"
Screw
80-8800-0016-000 10/23
RH Door
Shown
Outside of
Door
Rose
Door
Plastic Bushing

Advertisement

Table of Contents
loading

Table of Contents