Table of Contents
Advertisement
Regulatory Compliance
IC (INDUSTRY CANADA) Compliance
CSA C22.2 NO 61010-1 3rd Edition
Safety Requirements for Electrical Equipment for measurement, control, and
laboratory use – Part 1: General Requirements
ISED ICES-001:2020 Ed. 5
ISED ICES-001, Issue 5 – Industrial, Scientific, and Medical (ISM) Equipment
RSS-102 ISSUE 5
RSS-247 EDITION 2
Compliance is suggested by ISED Canada as CAN ICES-3 (A) / NMB-3 (A)
Method of compliance per each standard above.
Japan Compliance
Low power data communications in the 2.4GHz band - Radio Equipment
Technical Regulations Conformity Certification of Specified Radio equipment
(ordinance of MPT N° 37, 1981)
Certificate No: 201-210665 / 00
FCC Bluetooth RF Transmitter Characteristics
• Contains FCC ID: WAP3072
• Contains IC: CYBLE-343072-02 (AIROC Bluetooth LE Module)
• Frequency 2402-2480 MHz, Spread Spectrum
IC Bluetooth RF Transmitter Characteristics
• License: IC: 7922A-3072
• Frequency 2402-2480 MHz, Spread Spectrum
Japan Bluetooth RF Transmitter Characteristics
• Certification No. 201-210665
FCC/IC Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter,
except in accordance with FCC test procedures. This transmitter is considered
as mobile device.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
The minimum separation distance to human body is 40 mm. RF exposure or
SAR evaluations is not required when the separation distance is 40 mm or
more.
13910000-101 Rev. A • 29
Advertisement
Table of Contents
