Safety Instructions And Symbols; Cleaning Instructions - Ametek ORTEC Alpha Duo Hardware User's Manual

ALPHA DUO, ALPHA MEGA, & ALPHA ENSEMBLE USER'S GUIDE

SAFETY INSTRUCTIONS AND SYMBOLS

This manual contains up to three levels of safety instructions that must be observed in order to avoid
personal injury and/or damage to equipment or other property. These are:
Indicates a hazard that could result in death or serious bodily harm if the safety
DANGER
instruction is not observed.
Indicates a hazard that could result in bodily harm if the safety instruction is not
WARNING
observed.
CAUTION Indicates a hazard that could result in property damage if the safety instruction is not
observed.
Please read all safety instructions carefully and make sure they are understood fully before attempting
to use this product.
In addition, the following symbol might appear on the product:
ATTENTION – Consult the manual in all cases where this symbol is marked in order
to determine the nature of the potential hazards and any actions that must be taken
to avoid them.
DANGER – Hazardous voltage
Protective earth (ground) terminal
Please read all safety instructions carefully and make sure they are understood fully before attempting
to use this product.

CLEANING INSTRUCTIONS

To clean the instrument exterior:
• Disconnect the instrument from the power source.
Remove loose dust on the outside of the instrument with a lint-free cloth.
•
Remove remaining dirt with a lint-free cloth dampened in a general-purpose detergent and water
•
solution. Do not use abrasive cleaners.
CAUTION To prevent moisture inside of the instrument during external cleaning, use only enough
liquid to dampen the cloth or applicator.
Allow the instrument to dry completely before reconnecting it to the power source.
•
vi
932505_0G / 102022