Table of Contents
Advertisement
Regulatory Compliance
Device Regulatory Classification
Insulation Protection: Internally Powered
(3.7 V rechargeable battery) / Class 2
Ingress Protection: IP65
Operation Mode: Continuous
Compliance
Refractix complies with:
USA Compliance
UL 61010-1 (Edition 3.1)
UL standard for safety Electrical Equipment for Measurement, Control, and
Laboratory Use – Part 1: General Requirements
CE Compliance
IEC 61010-1:2010 + A1:2016 + COR1:2019 (Edition 3)
Safety requirements for electrical equipment for measurement, control, and
laboratory use – Part 1: General requirements
IEC 61326-1:2020 (Edition 3)
Electrical equipment for measurement, control, and laboratory use – EMC
requirements – Part 1: General requirements
CISPR 11:2015 + A1:2016 + A2:2019 / EN 55011:2016 + A11:2020
Industrial, scientific and medical equipment – Radio-frequency disturbance
characteristics – Limits and methods of measurement
IEC/EN 61000-3-2:2018 + A1:2020
Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic
current emissions (equipment ≤ 16A per phase)
IEC/EN 61000-3-3:2013 + A1:2017 + A2:2021
Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage
changes, voltage fluctuations and flicker in public low-voltage supply systems,
for equipment with rated current ≤ 16A per phase and not subject to conditional
connection
13910000-101 Rev. A • 28
Radio Equipment Directive (RED) 2014/53/EU
ETSI EN 300 328:2019-07 Ed. V2.2.2
Wideband transmission systems; Data transmission equipment operating in
the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized
Standard covering the essential requirements of article 3.2 of Directive
2014/53/EU
ETSI EN 301 489-1:2019-11 Ed. V2.2.3
Electromagnetic Compatibility (EMC) standard for radio equipment and
services;
Part 1: Common technical requirements; Harmonized Standard for
Electromagnetic Compatibility
ETSI EN 301 489-17:2020-09 Ed. V3.2.4
Electromagnetic Compatibility (EMC) standard for radio equipment and
services; Part 17: Specific conditions for Broadband Data Transmission
Systems; Harmonized Standard for Electromagnetic Compatibility
IEC 62479:2010
Assessment of the compliance of low-power electronic and electrical
equipment with the basic restrictions related to human exposure to
electromagnetic fields (10 MHz to 300 GHz)
Australia Compliance
AS/NZS 4268:2017
Radio equipment and systems –
Short range devices – Limits and methods of measurement
Method of compliance per standard above
FCC Compliance
FCC 47 CFR Part 15 Subpart B – Class B Digital Device – Unintentional
Radiators
ANSI C63.4:2014
American National Standard for Methods of Measurement of Radio-Noise
Emissions from Low-Voltage
Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
Advertisement
Table of Contents
