Turbidity Test Of The Purified Condensate - Beko QWIK-PURE CS 400 Installation And Operating Manual

Installation and operating manual

9.3.1 Turbidity test of the purified condensate

Tool
• No tool necessary
Image
Preconditions
Material
• No material necessary
1. Remove the reference turbidity tube from the
holder and fill it with a water sample from the
service valve.
2. Compare the sample with the reference turbidity
on the lower half of the reference turbidity tube.
The sample is clearer than the reference turbidity:
0 The QWIK-PURE
The sample is equally or more turbid than the
reference turbidity
0 Replace the filter cartridges immediately.
3. Document the result of the turbidity test.
QWIK-PURE
Protective equipment
To be worn at all times:
Description
CS works perfectly.
®
CS
®
41 | 64