Installation and operating manual
Image
NOTICE
Installation work
Overflow of the clean water tank.
If there is no gradient towards the wastewater system connection, or if there are
cross-sectional constrictions in the water outlet hose, this can lead to the clean
water tank overflowing.
•
The connection to the wastewater system is located below the condensate
drain.
•
Route the water outlet hose with a steady slope and without any kinks to the
connection to the wastewater system.
Description / explanation
20. Screw the supplied elbow connector with
the mounted flat gasket clockwise as far as
it will go onto the condensate drain of the
QWIK-PURE
CS and position it so that the
®
outlet is pointing downwards.
21. Attach a water outlet hose to the angled elbow
connector on the condensate drain and secure it
against slipping off with a hose clamp.
22. Tighten the hose clamp hand-tight.
23. Route the water outlet hose with a steady slope
and without any kinks to the connection to the
wastewater system.
QWIK-PURE
CS
®
33 | 64