Installation and operating manual
Image
Installation work
Description / explanation
12. Check the sealing surfaces in the connecting
pipe for damage and dirt.
0 Remove any dirt.
0 If there is any damage, contact
BEKO TECHNOLOGIES Service (see section
"1.1 Contact" on page 4).
13. Insert the connecting pipe into the connection
for the pressure relief chamber.
0 Point the connecting pipe's drain valve
downwards.
14. Align the connecting pipe's connection with the
filter cartridge's connection.
15. Insert the connecting pipe into the filter
cartridge connection.
16. Slide the bayonet mounts over the connections
and turn them all the way clockwise.
QWIK-PURE
CS
®
31 | 64