Table of Contents
Advertisement
To prevent serious injury or death, follow the procedures and comply with the
safety information in this section while performing service or maintenance.
MAINTENANCE
Use specified tools and safety equipment.
Remove all jewelry.
Do not allow loose clothing or hair to contact moving
parts.
Do not touch hot objects.
Make sure the key switch is in the OFF position and
the run/tow switch is in the RUN position.
Disconnect the negative battery terminal to prevent
accidental operation.
If lifting is required, follow the procedures and safety
information on page 44.
Wear eye protection.
Wear a face shield when working around the battery
packs.
Be careful when working around battery packs, using
solvents, or compressed air.
Use insulated tools within the battery area to prevent
blowing the internal BMS fuse.
To prevent risk of battery explosion, keep all flamma-
ble materials, open flames or sparks away from the
battery packs.
Be constantly aware that some components are
heavy, spring loaded, corrosive, explosive, can cause
high amperage or get extremely hot.
Keep hands, face, feet and body away from any area
that can expose them to injury if an unexpected situa-
tion occurs.
After service is complete, test the vehicle in an area
that is free from vehicle and pedestrian traffic.
MAINTENANCE
41
Advertisement
Table of Contents
