Lights; Headlight Replacement; Tail Light/Brake Light Replacement - Ezgo LIBERTY LSV Owner's Manual

MAINTENANCE

LIGHTS

Clean the lights frequently to maximize visibility.

Headlight Replacement

1. Disconnect the headlight
harness from the headlight.
2. Remove the screws secur-
ing the headlight assembly
to the headlight bezel.
3. Remove the headlight
assembly and install the
new one with screws.
4. Connect the harness to the
headlight assembly.

Tail Light/Brake Light Replacement

1. Disconnect the tail light harness from the
tail light.
2. Press the tail light assembly out of the
grommet by pushing on the back of the
assembly.
3. Press the new tail light assembly into the
grommet.
4. Connect the harness to the tail light
assembly.
50
Do not operate vehicle at night or in low light if any
lights are not properly and fully functioning. Poor
lighting reduces visibility that could cause an acci-
dent resulting in severe injury or death.
Since light components can get hot during operation,
allow lights to cool before servicing to prevent burns
to the skin.
Inside of Cowl
Screw
Headlight Harness
Screw