Table of Contents
Advertisement
ACCELERATING
NOTICE
1.
Insert the key and turn to desired direction of travel.
2.
Apply slow, steady pressure to the accelerator pedal to gradually increase
vehicle speed.
3.
Release the accelerator pedal to decrease vehicle speed.
BRAKING
NOTICE
1.
Release the accelerator pedal completely.
2.
Press the pedal to slow or completely stop the vehicle.
Coasting
The vehicle has a braking feature (pedal-up) that decreases speed when the
accelerator pedal is released. The feature continues to decrease speed until
the vehicle stops. If needed, press brake to decrease speed or stop quickly.
Do not allow the vehicle to coast at speeds that are above the maximum rec-
ommended speed. Apply constant brake pressure when descending a hill to
control the speed of the vehicle.
DRIVING PROCEDURE
1.
Perform the pre-ride inspection. See page 32.
2.
Sit in the driver's seat.
3.
Secure seat belt across hips.
4.
Check surroundings and determine the path of travel.
5.
Press the brake pedal.
6.
Insert the key and turn to desired direction of travel.
7.
With both hands on the steering wheel, release the brake
and immediately apply gradual and steady pressure to the accelerator
pedal.
Practice acceleration and deceleration to become familiar
with the vehicle's handling characteristics.
Accidental movement of the accelerator pedal can
cause the vehicle to suddenly move and cause
severe injury or death. Make sure the key is in the
OFF position any time the vehicle is parked.
Practice slowing and stopping using the brake to become
familiar with the vehicle's handling characteristics.
If towing a trailer, the weight of the load will increase
the braking distance required to slow or stop the
vehicle. Not allowing for increased braking distance
under load can cause an accident or injury.
OPERATION
37
Advertisement
Table of Contents
