Anti-Stall Feature; High Pedal Disable Feature; Diagnostic Mode Feature; Seat Belts - Ezgo LIBERTY LSV Owner's Manual

Table of Contents

or the accelerator pedal is applied. The warning beeper will not activate.

When pedal-up braking is activated by this sequence of occurrences, the

motor generates power which is returned to the batteries.

Anti-Stall Feature

Anti-Stall protection prevents motor damage if the vehicle is stalled against an

object or on a hill.

Example: If all of the following events occur:

• the system senses that the accelerator pedal is pressed (power

applied to motor)

• the motor is stopped long enough that additional time can cause dam-

age to the motor

the Anti-Stall feature will interrupt power to the motor. To restore power to the

motor, cycle the key switch to the OFF position and then back to the ON posi-

tion.

High Pedal Disable prevents acceleration of the vehicle if the direction selec-

tor is changed or the key is turned on while the accelerator is pressed.

With some electrical system failures, the Diagnostic Mode feature defaults to

a mode that allows the vehicle to operate at a decreased speed. If this feature

activates on your vehicle, contact your dealer.

All occupants must wear seat belts at all

times. Always make sure the seat belts

are secured for operator and all passen-

gers before operating.

Riding in this vehicle without wearing a

seat belt increases the risk of serious injury in the

event of an accident or sudden stop.

Before each operation, inspect seat belts for proper

operation and signs of damage including cuts, wear,

fraying or stiffness.

Position the seat belt as low as possible across hips.

If the belt is too high on the waist, the possibility of

being injured in an accident increases.

OPERATION

Table of Contents