Adjustment For Rear Brake Pedal - VOGE DS900X Operation Manual

Adjustment for rear brake pedal

•Keep the height of rear brake pedal at a suitable position, in case too
high, it is easy to be stepped during driving, which lead to brake pads and
plate usually touch makes friction even damage.
•For ensure reliable braking, the free play of rear brake pedal shall be
within 15-25mm, in case its free play is incorrect, please adjust as below:
-Remove split pin 1
-Remove pin axis 2
-Loosen nut 3 on adjusting stud
-Turn connective piece 4 of adjusting stud clockwise or anti-clockwise
-Turn clockwise the pedal gets up, anticlockwise it gets down.
-When the height of brake pedal adjusted to suitable position, lock up the
nut on adjusting stud.
-Re-assembly is precisely opposite to disassembly.
When re-assembling, please replace split pin for a new one.
When re-assembled, repeatedly press and release brake pedal, while confirming you can clearly feel the
pressing point.
In case pressing point failed to be felt, please contact VOGE dealer.
In case adjustment is not correct, the brake pad and plate are always under stress, which may lead to their
damage.
57
3
4
1
2
Free play for rear brake pedal shall be 15-25mm
Fastening torque for nut of adjusting stud shall be
18 N.m
!
Danger