Product Design; Incoming Acceptance And Product; Incoming Acceptance; Product Identification - Endress+Hauser Soliwave FDR56 Operating Instructions Manual

Incoming acceptance and product identification
8
3�1

Product design

A
1 Device variants
Device variants
Housing F16 (Polyester)
Electrical connection
Cable gland M20
Process connection Thread G 1½ in
accordance with ISO
228-1
Details about the available device variants can be viewed in the product configurator
on the Endress+Hauser homepage www.endress.com.
4 Incoming acceptance and

product identification

4�1

Incoming acceptance

Check the following during goods acceptance:
̃ Are the order codes on the delivery note and the product sticker identical?
̃ Are the goods undamaged?
̃ Do the nameplate data match the ordering information on the delivery note?
̃ If required (see nameplate): Are the Safety Instructions, e. g. XA, provided?
̃ Is the device properly secured?
If one of these conditions is not met, please contact the manufacturer' s sales office.
4�2 Product identification
The measuring device can be identified in the following ways:
• Nameplate data
• Extended order code with breakdown of the device features on the delivery note
• Enter serial number from nameplates in W@M Device Viewer
viceviewer): All of the information on the measuring device is displayed along with an
overview of the scope of technical documentation provided
B
Example
A B
F15 (Stainless steel)
Connector M12
Thread R 1½ in
accordance with EN
10226
Soliwave FDR56/FQR56
C
0000000155
C
F34 (Aluminum)
Thread 1/2" NPT
Thread 1½ NPT in
accordance with ANSI/
ASME
(www.endress.com/de-
Endress+Hauser