Setting Up Additional Computers On The Trusted Network - Watchguard Firebox SOHO 6 Wireless User Manual

6 Type the WINS Server address, DNS Server primary address,
DNS Server secondary address, and DNS Domain server suffix
in the applicable fields.
7 To configure the DHCP relay server, select the Enable DHCP
Relay checkbox.
8 Type the IP address of the DHCP relay server in the applicable
field.
9 Click Submit.
The SOHO 6 Wireless receives a DHCP request from a computer
on the trusted network. The request is sent from the SOHO 6
Wireless to the remote DHCP server. The SOHO 6 Wireless
receives the IP address sent from the DHCP server. The IP address
is sent from the SOHO 6 Wireless to the computer that made the
request. If the SOHO 6 Wireless cannot contact the remote DHCP
server in fewer than 30 seconds, the SOHO 6 Wireless uses its
internal DHCP server to respond to the computer on the trusted
network.
Setting up additional computers on the trusted
network
The SOHO 6 Wireless accepts the direct connection of a maximum
of four computers, printers, scanners, or other network
peripherals. The use of one or more 10BaseT Ethernet hubs with
RJ-45 connectors allows the connection of additional appliances.
Follow these steps to add a computer to the trusted network:
1 Make sure that the computer has an Ethernet card installed.
2 Shut down the computer.
3 Connect the computer to the network as shown in "Cabling the
SOHO 6 Wireless for more than four appliances" on page 26.
4 Restart the computer.
User Guide
Configuring the Trusted Network
47