Preparing The Remote Computers To Use The Muvpn Client; System Requirements - Watchguard Firebox SOHO 6 Wireless User Manual

Chapter 10: MUVPN Clients
4 Type a user name and a shared key in the applicable fields.
The user name is used as the e-mail address and the passphrase is used as
the pre-shared key for the MUVPN client.
5 Type the virtual ip address in the applicable field.
The virual IP address is the same as the IP address on the Trusted
Network Configuration page. This address is used by the remote computer
to connect to the SOHO 6 Wireless.
6 From the Authentication Algorithm drop-down list, select the
type of encryption.
The options are MD5-HMAC and SHA1-HMAC.
7 From the Encryption Algorithm drop-down list, select the type
of encryption.
The options are DES-CBC and 3DES-CBC.
8 Select Mobile User from the VPN Client Type drop-down list.
9 Select the All traffic uses tunnel (0.0.0.0/0 IP Subnet)
checkbox.
10 Click Submit.
Preparing the Remote Computers to Use the
MUVPN Client
The MUVPN client is only compatible with Windows operating
systems. The MUVPN client can only be installed on computers
that meet these system requirements.

System requirements

• A computer with a Pentium processor (or equivalent)
• Compatible operating systems and minimum RAM:
- Microsoft Windows 98: 32 MB
- Microsoft Windows ME: 64 MB
124 WatchGuard Firebox SOHO 6 Wireless