Configuring Additional Computers On The Trusted Network - Watchguard Firebox SOHO 6 User Manual

Chapter 4: Configure the Network Interfaces
10 Reboot the SOHO 6.
The SOHO 6 will send all DHCP requests to the specified, remote
DHCP server and relay the resulting IP addresses to the computers
connected to the trusted network. If the SOHO 6 is unable to
contact the specified, remote DHCP server in 30 second, it will
revert to using its own DHCP server to respond to computer on
the trusteed network.
Configuring additional computers on the trusted
network
The SOHO 6 accepts the direct connection of a maximum of four
computers, printers, scanners, or other network peripherals. The
use of one or more 10BaseT Ethernet hubs with RJ-45 connectors
allows the connection of additional appliances.
Follow these steps to add a computer to the trusted network:
1 Make sure that the computer has an Ethernet card installed.
2 Shut down the computer.
3 Connect the computer to the network as shown in "Cabling the
SOHO 6 for more than four appliances" on page 20.
4 Restart the computer.
5 Set the computer to get its address through DHCP as shown in
"Enabling your computer for DHCP" on page 16.
6 Shut down and restart the computer.
38 WatchGuard Firebox SOHO 6