Resetting The Soho 6 Wireless To The Factory Default Settings - Watchguard Firebox SOHO 6 Wireless User Manual

Chapter 3: SOHO 6 Wireless Basics
Firewall settings
All incoming services are blocked.
An outgoing service allows all outbound traffic.
All of the firewall options are disabled.
The DMZ pass-through is disabled.
System Security
The System Security is disabled. The system administrator
name and system administrator passphrase are not set. All
computers on the trusted network can access the
configuration pages.
SOHO 6 Wireless Remote Management is disabled.
VPN Manager Access is disabled.
Remote logging is not configured.
WebBlocker
WebBlocker is disabled and the settings are not configured.
Upgrade Options
The upgrade options are disabled until the license keys are
entered into the configuration page.
Resetting the SOHO 6 Wireless to the factory
default settings
Reset the SOHO 6 Wireless to the factory default settings if it is not
possible to correct a configuration problem. A reset to the factory
default settings is required if the system security passphrase is
unknown or the firmware of the SOHO 6 Wireless is damaged by a
power interruption. Follow these steps to reset the SOHO 6
Wireless to the factory default settings:
1 Disconnect the power supply.
2 Press and hold the reset button.
36 WatchGuard Firebox SOHO 6 Wireless