Configuring The Trusted Network With Static Addresses; Configuring The Optional Network For Wireless Networking - Watchguard Firebox SOHO 6 Wireless User Manual

Chapter 4: Configure the Network Interfaces
5 Set the computer to get its address through DHCP as shown in
"Enabling your computer for DHCP" on page 21.
6 Shut down and restart the computer.
Configuring the trusted network with static
addresses
To disable the SOHO 6 Wireless DHCP server and make static
address assignments, follow these steps:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless:
The default IP address is: http://192.168.111.1
2 From the navigation bar on the left side, select
Network = > Trusted.
The Trusted Network Configuration page opens.
3 Type the IP address and the subnet mask in the applicable
fields.
4 Clear the Enable DHCP Server on the Trusted Network
checkbox.
5 Click Submit.
6 Reboot the SOHO 6 Wireless as necessary.
7 Configure the appliances on the trusted network with static
addresses.
Configuring the Optional Network for
Wireless Networking
To activate the wireless network, you must enable the optional
network.
48 WatchGuard Firebox SOHO 6 Wireless