Connecting And Disconnecting The Muvpn Client; Connecting The Muvpn Client - Watchguard Firebox SOHO 6 Wireless User Manual

5 Type the virtual IP address in the applicable field.
The virual IP address is the same as the IP address on the Trusted
Network Configuration page. This address is used by the remote computer
to connect to the SOHO 6.
6 From the Authentication Algorithm drop-down list, select the
type of authentication.
The options are MD5-HMAC and SHA1-HMAC.
7 From the Encryption Algorithm drop-down list, select the type
of encryption.
The options are DES-CBC and 3DES-CBC.
8 Select Pocket PC from the VPN Client Type drop-down list.
9 Click Submit.
For additional information about configuring your Pocket PC to
serve as an MUVPN client, go to the WatchGuard Web site:
https://www.watchguard.com/support/sohoresources/soinstallhelp.asp
Connecting and Disconnecting the MUVPN
Client
The MUVPN client software makes a secure connection from a
remote computer to your protected network through the Internet.
To establish this connection, you must connect to the Internet and
use the MUVPN client to connect to the protected network.

Connecting the MUVPN client

1 Connect to the Internet through a Dial-Up Networking
connection, a LAN connection, or a WAN connection.
User Guide

Connecting and Disconnecting the MUVPN Client

149