Watchguard Firebox SOHO 6 Wireless User Manual page 152

Chapter 10: MUVPN Clients
Configuring network names
From the Windows desktop:
1 Select Start => Settings = > Control Panel.
2 Double-click the Network icon.
The Network window appears.
3 Make sure the Client for Microsoft Networks is installed.
The Client for Microsoft Networks must be installed before you continue
with this procedure. For instructions, see "Installing the Client for
Microsoft Networks" on page 126.
4 Click the Identification tab.
5 Type a name for the remote computer in the applicable field.
This name must be unique on the remote network.
6 Type the domain name for this connection in the applicable
field.
7 Enter a description for the remote computer in the applicable
field.
This step is optional.
8 Click OK to close the Network window.
Click Cancel if you do not want to save the changes.
9 Reboot the computer.
Installing the Client for Microsoft Networks
The Client for Microsoft Networks must be installed before you
can configure network names. If the Client for Microsoft Networks
is not installed, follow these steps.
From the Network window:
1 Click the Configuration tab and then click Add.
The Select Network Component Type window appears.
2 Select Client and then click Add.
The Select Network Client window appears.
126 WatchGuard Firebox SOHO 6 Wireless