Configuration - Watchguard Firebox SOHO 6 Wireless User Manual

Configuration

Where are the SOHO 6 Wireless settings stored?
The configuration parameters are stored in memory on the
SOHO 6 Wireless.
How do I set up DHCP on the trusted network of the
SOHO 6 Wireless?
1 Make sure your computer is configured to use DHCP. See
"Enabling your computer for DHCP" on page 21 for additional
information.
2 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless:
The default IP address is: http://192.168.111.1
3 From the navigation bar on the left side, select
Network = > Trusted.
4 Select the Enable DHCP Server checkbox.
5 Click Submit.
How do I change to a static, trusted IP address?
To use a static IP address, select a network IP range and subnet
mask for the trusted network.
The network IP ranges and subnet masks in the table below are
reserved for private networks in compliance with RFC 1918.
Replace the Xs in the network IP address with a number between 1
and 254. The subnet mask does not need to be changed.
Network IP range
10.x.x.x
User Guide
Troubleshooting tips
Subnet mask
255.0.0.0
169