Watchguard Firebox SOHO 6 Wireless User Manual page 53

computer. Connect the Ethernet cable to the WAN port on the
SOHO 6 Wireless.
The SOHO 6 Wireless is connected directly to the modem or other Internet
connection.
3 Connect one end of the straight-through Ethernet cable
supplied with your SOHO 6 Wireless to one of the four
numbered Ethernet ports (labeled 0-3) on the SOHO 6
Wireless. Connect the other end to the uplink port of the
Ethernet hub.
The SOHO 6 Wireless is connected to the Internet and your Ethernet hub.
4 Connect an Ethernet cable between each of the computers and
an uplink port on the Ethernet hub.
5 If you connect to the Internet through a DSL modem or cable
modem, reconnect the power supply to this device. The
indicator lights flash and then stop. The modem is ready for
use.
User Guide
Physically Connecting to the SOHO 6 Wireless
27