Windows Nt Operating System Setup - Watchguard Firebox SOHO 6 Wireless User Manual

10 Click Yes to restart the computer.
The computer reboots.

Windows NT operating system setup

This section describes how to install and configure the network
components that are required for the Windows NT operating
system. These components must be installed before the MUVPN
client will function correctly on a Windows NT computer.
The Mobile User VPN Adapter supports L2TP .
Installing Remote Access Services on Windows NT
Remote Access Services (RAS) must be installed before the Mobile
User VPN Adapter can be installed. If RAS is not installed, follow
these steps.
Follow the Windows desktop:
1 Select Start => Settings = > Control Panel.
2 Double-click the Network icon.
The Network window appears.
3 Click the Services tab and then click Add.
4 Select Remote Access Services from the list and then click OK.
5 Enter the path to the Windows NT install files or insert your
system installation CD and then click OK.
The Remote Access Setup window appears.
6 Click Yes to add a RAS device, such as a modem, and then click
Add.
7 Complete the Install New Modem wizard.
User Guide
Preparing the Remote Computers to Use the MUVPN Client
N
OTE
129