Setting Up Logging To A Watchguard Security Event Processor Log Host - Watchguard Firebox SOHO 6 Wireless User Manual

Chapter 7: Configure Logging
Setting up Logging to a WatchGuard Security
Event Processor Log Host
The WSEP (WatchGuard Security Event Processor) is an
application that is available with the WatchGuard Firebox System
package used by a Firebox II/III. The WSEP application runs on a
computer that functions as the log host. The WSEP application
records log messages sent from the Firebox II/III. If you have a
Firebox II/III, configure the WSEP to accept the log messages from
your SOHO 6 Wireless. Then follow these instructions to send
your event logs to the WSEP.
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless.
The default IP address is: http://192.168.111.1
2 From the navigation bar on the left side, select
Logging = > WSEP Logging.
The WatchGuard Security Event Processor page opens.
Select the Enable WatchGuard Security Event Processor
3
Logging checkbox.
4 Type the IP address of the WSEP server that is your log host in
the applicable field.
90 WatchGuard Firebox SOHO 6 Wireless