Installing And Configuring The Muvpn Client; Installing The Muvpn Client - Watchguard Firebox SOHO 6 Wireless User Manual

Installing and Configuring the MUVPN Client

The MUVPN installation files are available at the WatchGuard
Web site:
http://www.watchguard.com/support
To install and configure the MUVPN client, you must have local
administrator rights on the remote computer.

Installing the MUVPN client

Follow these steps to install the MUVPN client:
1 Copy the MUVPN installation file to the remote computer.
2 Double-click the MUVPN installation file to start the
InstallShield wizard.
If you accidentally skip a step, click cancel and start the installation
again.
3 Click Next.
If the InstallShield stops because read-only files are detected, click Yes to
continue the installation.
4 A welcome message is displayed. Click Next.
The Software License Agreement is displayed.
5 Click Yes to accept the terms of the License Agreement.
The Setup Type window appears.
6 Select the type of installation. WatchGuard recommends that
you use the Typical installation. Click Next.
7 On a Windows 2000 computer, the InstallShield will detect the
Windows 2000 L2TP component. If the component is installed,
the InstallShield does not install it again. Click OK to continue.
The Select Components window appears.
User Guide
Installing and Configuring the MUVPN Client
N
OTE
137