Chapter 4: Configure the Network Interfaces
Configuring the SOHO 6 Wireless external
network for PPPoE
If your ISP assigns IP addresses through PPPoE, your PPPoE login
name and password are required to configure the SOHO 6
Wireless.
To configure the SOHO 6 Wireless for PPPoE:
1
Open your Web browser and click Stop.
Because the Internet connection is not configured, the browser cannot load
your home page from the Internet. The browser can open the configuration
pages in the SOHO 6 Wireless.
2
Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless:
The default IP address is: http://192.168.111.1
3
From the navigation bar on the left side, select
Network = > External.
The External Network Configuration page opens.
4
From the Configuration Mode drop-down list, select PPPoE
Client.
The page refreshes.
44
WatchGuard Firebox SOHO 6 Wireless